This video will demonstrate the quickest technique to create a rolled hem on chiffon or any other lightweight fabric. We will first demonstrate it on a serger, and then on a domestic machine for those who do not have access to a serger. Using the specified materials and this method will result in a gorgeous rolled hem that looks just as professional as a store-bought garment!
This technique is an effective way to maintain the professional appearance of the edge, as if it were never altered. Aside from your machine, you will need only a few minor yet essential materials:
First, you must select the proper thread. We will use a 100wt poly thread called InvisaFil, which will blend so nicely with the cloth that it will be invisible. And since the thread is so fine, it will stitch through the thin fabric with greater ease, resulting in less ruffles. It is vital to choose such a thin thread because, in addition to revealing less, it will not weigh down the lightweight cloth. Post ByL mrsewguru.
Due to the fineness of the thread, we will also select a needle with a smaller eye. Choose a microtex needle in size 60/8 or 70/10, which works well on lightweight textiles.
I will conclude by using a bobbin that has been pre-wound with DecoBob thread. This pre-wound 80wt poly thread on a plastic-sided bobbin pairs well with the top thread. Alternately, you can wind the InvisaFil thread onto your own bobbin; just care to wind it slowly, as the thin thread tends to drift away. If you’re using a serger to hem your cloth, you won’t be using a bobbin, therefore you’ll need DecoBob thread on a spool for your lower loopers.
On a Serger:
We will employ a three-thread rolled hem with InvisaFil in the needle and upper looper and DecoBob in the lower looper. Consult the manual for your serger and adjust the stitch length and cutting blade to create a narrow, tight hem.
Perform a test run on a similar fabric after threading your machine to ensure that your cloth is not puckering. You may need to tweak your differential settings in order to obtain a nice, flat edge.
Mark your hem with a vanishing marking pen, and then sew precisely along the line you’ve drawn. This is the easiest way to create a delicate hem on chiffon or other fine fabrics.
For overlock your clothes or Fabrics you need a Serger machien.
On a home sewing machine with a rolled hem, you should:
This two-step procedure will help you obtain flawless results when hemming delicate cloth with a home machine. Mark the location of the finished hem and cut 1″ below the line. We will later cut this tighter. Ensure that the cloth is laid out evenly and level, as these sorts of materials can easily shift during the cutting process. With InvisaFil on top and DecoBob in the bobbin, thread your machine. You are now ready to sew! also Check out: Fashion Shop Online For Women
Using your fingertips, fold the fabric edge 1/8″ below the finished hem length and sew closely to this folded edge. Continue doing thus until the conclusion of the fabric. If you’re hemming a looped item, such as a sleeve or skirt, we recommend beginning and ending on the seam to help conceal the backstitching.
When you’re finished, use a pair of sharp, fine-tipped scissors to cut away the excess cloth as closely as possible to the stitching line without cutting into the stitching. Be careful not to accidentally cut through your seam. Continue doing this until the finish.
Press the cloth all the way around to press the stitches into the fabric and to remove any puckers.
After removing the excess fabric and ironing, fold the edge 1/8″ over again (following the marking for the completed hem) and stitch it down again over the previous line of stitching to complete the rolled hem. If you have difficulty tucking the edge with your fingers and maintaining a uniform 1/8″ length, you can press the edge with an iron before sewing.
That’s the whole story! Because the fine thread does not add extra weight, you can see how little the thread shows in the finished hem as well as how flat the edge is. Due to the fact that most hems have a curved edge, completing the hem in two steps helps maintain consistency and eliminates issues. These supplies and basic techniques are all that’s required for professional-grade hemming.
